500W Grid Tie Power Inverter Converter For Wind Turbine Wind Energy 10.8V - 30V DC to 90-130V AC Stackable by mass power
Shipping cost is calculated during checkout.
Out of Stock - stock arriving soon
Introducing: 500W Grid Tie Power Inverter Converter For Wind Turbine Wind Energy 10.8V - 30V DC to 90-130V AC Stackable by mass power
We are proud to offer the brilliant 500W Grid Tie Power Inverter Converter For Wind Turbine Wind Energy 10.8V - 30V DC to 90-130V AC Stackable.
With so many available these days, it is good to have a name you can recognise. The 500W Grid Tie Power Inverter Converter For Wind Turbine Wind Energy 10.8V - 30V DC to 90-130V AC Stackable is certainly that and will be a great buy.
For this price, the 500W Grid Tie Power Inverter Converter For Wind Turbine Wind Energy 10.8V - 30V DC to 90-130V AC Stackable is widely recommended and is always a popular choice with lots of people. mass power have added some excellent touches and this results in great value.
The grid-tie inverter can transfer wind vitality from wind generators directly into the residence grid utilizing no additional devices. It can be linked to any outlet (conventional network) in the residence. The grid-tie inverter controls the stage and the frequency and voltage of the energy created by the wind generator. It makes a pure sine-wave and matches that of the grid.
This model grid-tie has develop in bridge rectifier and dump load controller, it can preserve the rotating pace of the wind turbine and hold the voltage from the wind turbine usually at the assortment of the rated assortment of the grid tie inverter. It also has a higher voltage defense purpose, when the wind is as well huge, and the dump load managing system cannot hold the output voltage from the wind turbine, the controller will disconnect by itself from the wind turbine, so it is quite safe to be utilised.
Note: It can be only utilised in dry place.
There are 4 final on the still left facet of the inverter, 1 red final and 1 black will be linked to the stage output from the wind turbine, and two black final will be linked to dump load resistors.
There are 4 LED indicators, 3 inexperienced indicators and 1 red indicator, 3 inexperienced LED indicators will commence to cycle from still left to appropriate when the grid and AC input supply is detected. This signifies the inverter is working below normal condition. The charge of the cycling is in accordance to how considerably energy is being output from the wind turbine. The bigger the output energy is, the quicker the charge is.
If there is no AC grid detected, the red LED will be on, the inverter will not put out energy, this is referred to as "Island Defense" .
Some Other Specs
Basic and safe installation
Reverse polarity defense
Consistent Energy Output
Working Temperature Array: -ten ~ 45 centigrade
- Normal AC Output Power:450W; Maximum AC Output Power:500W; Peak Inverter Efficiency: 92%
- AC Output Voltage Range: 90V ~ 130V; DC Input Voltage Range: 10.8V ~ 30V; Total Harmonic Distortion(THD):<5%; Power Factor: 0.99
- AC Output Frequency Range: 46Hz ~ 65Hz; Output Current Waveform:Pure Sine-wave; Standby Power consumption:<0.5W
- Features:MPPT Function/Over Current Protection/Over Temperature Protection/Reverse Polarity Protection/Island Protection/Stackable
- Package Includes: Power inverter and Power cord.